No matter how many time I see them, its amazing that this is how good they are out of the mould with a little clean up.

I think that you got plenty of time to decide on stripes but the silver with red always looks goo.

Cool...
If you go with gold - you've got to do the wheels too...
That would look saweeet!

Congrats

i showed this pic to a friend of mine who is a car detailer he said he cant wait to get his hands on it if his ski boat is anything to go buy it should come up a treat . I think your right about the wheels as well Dimis

Gold wheels you say??? Come on Tenrocca, for old times sake.....

wazza sent some pics of the modifications they have needed to make to fit my trans in . i sent the trans up to the boys a few weeks ago and i knew it was large but untill you seen it near the trans tunnel you dont realise just how big .

i suspect some of the mods are for the linkage's to clear hopefully these pics will load . kudos to the boys up there who are prob cursing me about now %/
cheers dean

hi all
well its getting closer :-) its now made it to the packing area and sitting on the pallet ready to be packed and loaded . ive asked for a few small extra bits like the sway bar upgrade may as well fit it while building the car than retro fitting them later .. here is the latest pic i have of the red rocket . i have also put the engine on the stand to start painting and detailing the engine as well

cheers dean

That looks like a really expensive paint job Deano. Must have cost a fortune! ;)

Cheers,
Glen

the best quality spray cans from supercheap Glen only the best will do lol

Well done Mate shouldn't be long now and a nice Chrissy present as well.

well just got the news ive been waiting for car leaves the factory tomorrow to head home to SA to say im pretty happy is understatement :-)

Merry Christmas!

Better get that trailer finished to make room.

trailer is at a workshop the car has space at home much to my mrs dismay as her car has just been kicked out of the carport area once the cobra arrives .. but work on the trailer has been coming along slowly almost ready to clad now .

cheers dean

Looks Good
 

Saw you car getting put on the pallet yesterday whilst picking up some parts.It looks awesome. The color is great. Has a real pop to it. Look forward to seeing the build progress

Dave

Looks Good
 

Saw you car just before it went onto the palet on Monday. It looks awesome! The colour looks awesome. Really has a great pop to it. Good luck with it when it arrives.

well it's here :-) arrived to the workshop of Tuesday morning man was that pallet big and loaded to the hilt including my auto trans on it's return trip.
once off the truck it was obvious that there was some damage as parts of the white plastic shrink wrap was shredded in some places and that stuff is bloody tough you cant tear it by hand .
it looks like a pallet only guessing has been sitting accross the nose cone the plastic was torn and there are scuff marks across the nose i believe those will buff out tho . however on the lhd side gaurd just behind the headlight something heavy has been resting there and has deformed the boddywork and but 3 or 4 small dents about 4 inches long you can see them to look at and when you rub your hands across it you can feel them . on the right rear just behind the door the plastic was ripped and a gouge about 30 to 40 mm long about 3 mm wide and about 2 to 3 mm deep . i just want to point out that pace have been fantastic when i phoned them and " I DO NOT BLAME THEM AT ALL" this is purely a transport damage problem i do not want this to turn into a pace bashing post if it does i will delete the thread ...

i have been assured the damage will be repaired and i have send pics and spoken to there body work foreman already ok the rest of the car is just stunning as this is the first time ive seen it i was just blown away and the guys in the workshops next to ours all took a extended lunch to help me unpack the pallet and get the car on its wheels .

it took 4 loads with a ford ranger loaded to the hilt to get all the boxes back to my place i have only just finished going thru whats there and there is more to come lol. there is more than enough to get started and keep me busy for some time .

i want to thank absolute pace on a quality product and to say thanks to the blokes on the workshop floor who all do there bit . i know ive been a pain in the arse over delivery time and been quite vocal but i think absolute pace have taken some of it onboard and ive learned to be more patient and my relationship with pace now is better now than its ever been .
win win all round i think to anyone looking at building a cobra and are undecided on a kit get your arse up to the factory and at least have a look if your interstate fly up take ya mrs and make a dirty weekend of it lol .. will post some pics when the camera recharges .

cheers dean

Congrats on getting your car Deano, early christmas present.

Good to hear that Pace have been looking after you too and that they have been responsive to their customer feed back.

Shame Mate.....New body time sounds like? I got a cheap alloy body going if that helps.....lol.

nah wont need a new body just some loving by someone who knows what there doing ...that aint me tho ....you wont sell yours mate been the number one alloy pace car it will be a collectors item ..

here it is in it's new home and its build area the mrs is not too happy her car has to live outside now i have a feeling i will be building a carport soon %/

cheers dean