Mounting rear QA-1 and PROS shocks to CR frame & axle

[Double Venom]

This eliminates all extra bracing etc. Simple bolt in procedure with the proper parts;

1) Four shock mounts needed. Any auto parts store carry's them; NAPA,CAR QUEST, AUTOZONE etc.,


Sorry for being so fuzzy-can't find my tripod!

Then knock out all OEM factory bushings. (I use a socket and a big hammer!)





Mount one shock adapter in the designated loation on the frame itself:



Install one shock mount in the OEM hole on the axle bracket


I then apply "Anti-seize" to upper and lower washer and about half way up the threads of the shock;



Mount the shocks!-Perfect fit- extremely strong and no clearance problems!!



Just to eliminate any confusion, take the bushings that come with the shock mount kits and throw them in a drawer someplace-not needed-not used!

Any questions?

DV