|
Jeff, did you use Dans drawings to make the glovebox?
Larry |
No sir....
I made it to fit my space out of Alloy. I have felt for cover just not sure I will use. |
1 Attachment(s)
Headed towards KW power.
|
Quote:
|
1 Attachment(s)
This may be the last ride of the year!
34F is a bit brisk ..... yup getting old when I say that. CSX4125 in front of me... |
1 Attachment(s)
Getting set for 2018 season.
Lined the glove box with needle punch fabric, black.... With the help of my friend Dan, added original cast side markers however had to use new centers. Neat authentic piece! |
1 Attachment(s)
Another angle.....
The edges are slightly arched and sharper casting. These were all cast at once and the casting marks on back match all other originals as one batch equal a match.... |
1 Attachment(s)
Detail update.
Minor detail but cool. Thanks to John Bessey for making these parts. All about the details. |
1 Attachment(s)
John patterned these parts after an early car.
The detail is in the notch and playing. Today’s has no notch and are yellow playing. Next detail is to change the screws to studs |
1 Attachment(s)
Direct comparison
|
1 Attachment(s)
A little better...
....... now for the other 24 that need changing to studs .. |
1 Attachment(s)
Best view of bracket
|
Hi Jeff
Did you use plastic washers? |
Actually on the bottom, helps space the gap with the spun units.
In the picture I had it on top, since moved it to below. |
1 Attachment(s)
Here’s what they look like with the Weber supplied air horns....
|
1 Attachment(s)
Continuing to make small changes now that winter is upon us.
Added period rod ends to SS rods. Going to use small alloy tubing to shroud rod for correct look. Always work to be done. |
Love the detail Jeff. Looking real good!
|
Hi Jeff
Your outstanding work and your eye for the details are of great inspiration for my project. But the chocolate foil on the Weber's is still challenging me :LOL: http://www.clubcobra.com/forums/pict...ictureid=17998 |
1 Attachment(s)
Added a little more of a touch.
Happy at the moment, will touch up final details after adjustment. |
1 Attachment(s)
Started out this year and found fuel pump failure.
Rebuilt Carter, in and up and running |
| All times are GMT -7. The time now is 03:24 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: