Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Scratch Builders Forum (http://www.clubcobra.com/forums/scratch-builders-forum/)
-   -   289 progress........ (http://www.clubcobra.com/forums/scratch-builders-forum/102466-289-progress.html)

Thor maine 04-14-2015 05:09 PM

Since it looks more like a Dragon Snake, what valve covers did they use???

1985 CCX 04-14-2015 06:25 PM

Hmmmm
Tom, you are something. Not sure the flares and the front spats are a Dragonsnake ID?
Please educate us Tom.

1985 CCX 04-14-2015 06:36 PM

1 Attachment(s)
Here is one.

1985 CCX 04-14-2015 06:41 PM

1 Attachment(s)
El Cid

1985 CCX 04-14-2015 06:43 PM

1 Attachment(s)
Another

1985 CCX 04-14-2015 06:49 PM

1 Attachment(s)
Personal favorite 2472

1985 CCX 04-14-2015 06:56 PM

1 Attachment(s)
Miles at Riverside.

1985 CCX 04-14-2015 07:05 PM

1 Attachment(s)
Factory team cars. .......

1985 CCX 04-14-2015 07:32 PM

1 Attachment(s)
Ok, lost track of the ??????
Oh yah, Tom. What is a Dragonsnake

LMH 04-14-2015 09:10 PM

It doesn't look like one of the Dragonsnake's. Stick wiith the stamped valve covers.
Then, since you're going to just throw away those Buddy Bars, you should send them to me and I'll dispose of them properly!;)
Larry

Thor maine 04-15-2015 05:58 AM

Jeff your car is a beauty and your work on it was fantastic to watch. And yes it has the comp windscreen and the front spats. But from a ride height ,stance (especially the front end), and tire and wheel selection, it has the Dragon Snake look your pictures only reinforce this. The car is super cool whether Dragon Snake or Comp car tribute.

1985 CCX 04-16-2015 01:58 PM

1 Attachment(s)
Larry,

LOL they are going up on the wall.....

1985 CCX 04-16-2015 06:46 PM

1 Attachment(s)
Comp covers secure.

1985 CCX 04-16-2015 06:47 PM

1 Attachment(s)
One more view

LMH 04-16-2015 09:48 PM

Quote:

Originally Posted by 1985 CCX (Post 1345353)
Larry,

LOL they are going up on the wall.....

Yeah, that's just what your wall needs... another set of valve covers!:LOL:
Larry

spl310 04-17-2015 01:23 PM

Sadly, I am not too far behind you in valve covers. I would like to find a set of chrome 289 covers at some point though.

1985 CCX 04-20-2015 08:51 AM

1964 Cobra video
 
Dropped a few Youtube's this weekend.....
Spring is here........

[ame]https://www.youtube.com/watch?v=2KQcY1XyRKU[/ame]

1985 CCX 04-20-2015 09:40 AM

Second video...... :)

[ame]https://www.youtube.com/watch?v=K5T26YKC1qM[/ame]

1985 CCX 05-16-2015 03:18 PM

1 Attachment(s)
At Acton Custom today to work out caster etc.
I did the full disassembly and prep so brackets could be plasma cut.
Once made an outside hired welder will fasten to frame.
I will perform complete reassemble once welding is done.

*13* 05-16-2015 04:28 PM

Sounds familiar!


All times are GMT -7. The time now is 06:33 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: