|
I thought I remembered you posting the color, but I couldn't find it. What's the color name and code for the paint?
|
1 Attachment(s)
Front quick jacks finished and installed.
Paint color is Viper Red.:) |
Nice�� And thanks for the color info
|
3 Attachment(s)
Whats in the big box?
Looks FE, :cool: |
Looks like that one is coming together nicely! Wow that motor looks clean too!
SB |
1 Attachment(s)
Engine and gearbox in, time for more pipe work.
|
Craig,
Looks good. All sorts of room to work with in there ;) Looking forward to seeing those custom made pipes. Jim |
2 Attachment(s)
Quote:
Drivers side complete |
I see a lot of effort in the primaries, but I don't like the collector.
|
Quote:
|
1 Attachment(s)
Quote:
|
header gasket
If you like advise on header mounting, read on. If not ignore me :-)
Think flanges, 3/8" - done individual header pipes - done Studs with ARP serrated nuts - almost done ;-) No fixed connection to collector/sidepipe to keep the vibrations away - done No gasket! (worked for me) This way the flanges sit from day one. May not work if your sidepipes are very restrictive To fit the sidepipes once the header pipes take a set, and may warp a bit, I let 3 of 4 loose, slide them into the collector and tighten the primaries. This is when no gasket helps. I also had the slip-in length slighlty different so that one after another can be pushed in. |
Allways open to advise, if I think it makes sense and would make my job easier I'm all for it.
|
Quote:
|
2 Attachment(s)
Quote:
The pipes went together nicely, no issues with fitting the primary pipes to the side pipe collector. Fit and finish are spot on.:) Compared to some of the other junk I've seen come in here I take these pipes all day long. :JEKYLHYDE |
The car is wonderful. The details are just incredible.
I really like the color. You mentioned Viper Red, but I don't see the code. Please post it if you don't mind. John |
Quote:
this car is coming along super nice. The paint I was told is PPG viper red, I don't have the code but will ask the painter for it. Cheers |
Looks really good now.
I'd like to see some heat shielding over the master cylinders. |
Quote:
http://www.clubcobra.com/forums/pict...ictureid=17741 David |
2 Attachment(s)
Here we have one of my oil puke tanks / catch can mounted.
Drilled and tapped the gearbox breather location, made up the fitting to connect the hose to the puke tank. |
| All times are GMT -7. The time now is 07:06 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: