Paintwerks' Absolute Pace 427SC build thread

Krait · #1 (**permalink**) 10-22-2015, 02:15 AM

Quote:

Originally Posted by Jaydee

I asked my engineer and he said it should be fine to fit an dash adjuster. I'm not going to bother fitting one. Even still. The bar can still drift sideways even if you use locknuts. The rose joint inside the brake pedal sleeve is free to move side to side.
JD

Some states require that the balance bar be made non adjustable (welded) after the certifying engineer is satisfied with the brake bias.

Jaydee · #2 (**permalink**) 10-22-2015, 04:35 AM

You can't really set the bias up properly until you've bedded in the brakes after a couple hundred k's anyway. It feels like you live in 7 different countries in Ozz. Sucks. I guess in the States it'll be worse?
JD

Paintwerks · #3 (**permalink**) 10-22-2015, 05:10 PM

Quote:

Originally Posted by Jaydee

It feels like you live in 7 different countries in Ozz. Sucks. I guess in the States it'll be worse?
JD

True. I know that in the USA, at least California is a different country!