|
Yeah, just slip them over the horns.
Were you running w/o floorboards? That had to be exciting! |
1 Attachment(s)
Yes, just stay clear of the shaft..... :LOL:
|
1 Attachment(s)
Hyde
Yes, Wife had to hold up the wedding dress.................... Keep it clear of drive shaft |
You're a lucky man. She may have a little more spirit, than mine.
|
4 Attachment(s)
process............. **)
|
He said he'd sticker it with floors, he didn't specify what they were to be made of........
I think I've read between the lines of a few too many rulebooks in my past. |
The ebrake looks like a tight fit. Does it clear, when released?
|
Everything clears. The ebrake, short shifter and 3rd gear as that is the tightest.
The T10 has fairly large linkage. All alloy rough cut via cardboard mock ups. Getting the scotch brite ready. Getting pumped. |
3rd is close mine, also. Are you running special fuel? Any additives? The fuel over here causes me nothing but problems. I've found a few non ethanol stations, now.
|
Hyde
I do run 93 however I try to get race fuel when possible. We are fortunate here as there is a at the pump Cam2 in town. Expensive but sweet..... So far I have not done anything less than a 50/50 Maybe I should just use the cardboard? Nick thinks so... Just paint and go? :eek: |
1 Attachment(s)
Who needs alloy................
|
I haven't worried too much about octane, 89 is what I've been running. The non ethanol is 91, here. The problem I've been having is the idle ports(beneath the adj screw) kept clogging. Another 289 owner gave me a bottle of sea foam & I topped off with the non ethanol & the problem disappeared. Been running top notch, since. I going to run the tank down & fill up with straight non ethanol, just to see what happens. I can't find a concrete number on what % ethanol is in our fuel here but, I do know the gasoline here stinks(odor), in comparison to what we had in CA. As far as I can remember, it was no different in Oregon or Washington. I do know that CA is running close to 10% ethanol. I'm not a chemist but, I'd sure be interested in what is going on in the fuel here.
|
I am a chemist, by chance
There is a kit you can buy at Autozone that can give you a reasonable OH content. How many in line filters you running? Did you get ethanol rated hoses? I have 4 in-line filters before fuel hits the carbs |
4? Wow! I have 2 & yes, on the hoses. I also checked the screens in the carbs & they are perfectly clean.
What is OH? Sorry... |
Sorry
O-H is fast way to say alcohol ...H H H-C-C-O-H Ethanol ...H H |
2 Attachment(s)
Decided that the cardboard floors were not going to last. Chose to go in alloy.......
Rough cut pictured......................... |
Looks awesome Jeff. It is amazing how much time, energy and patience is required to make each and every panel. Great job.
|
Kevin
Thanks, don't forget the cuts. Alloy is sharp. |
Looks great!
|
Wow! Looks great Jeff! Closer day by day! Fitting get today?
|
| All times are GMT -7. The time now is 08:14 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: