|
cpteddie,
May I suggest a different tranny cooler? This is normally used for an oil coler and mounts in the intake. More cooling surface and will bolt in when I am done with the shroud, http://www.finishlineaccessories.com...%20Cooler1.jpg (We wont need the "kit", I have all kinds of #10 line and we now have the fittings for it.) Also we need a coil bracket for the MSD coil part # PN8213 Jegs or Summit will carry them. |
Can do DV!!!
Cooler ordered from Finishline, its being drop shipped to you. Will this coil bracket work OK? http://www.clubcobra.com/photopost/d...l_bracket1.jpg Maybe I should bring my power washer with me on Sunday. I saw the picture from your "super duper" camera with ALL the dust on the car :LOL: |
Cooler--Good.
Coil bracket DISREGARD- Chad is getting you a professional type one that wont rust or wobble! He is also finding a Inspection/Dust Cover for the C-6 Just picked up your motor mounts and tranny mount-done-looks great and they all match! Need you to call John again, same guy as the starter guy at 231 873-4471. Motor goes in for the last time today...I hope! :) DV |
Sounds good DV!
I'll call John and hand over some cash :JEKYLHYDE (paid) Can't wait to see our baby on Sunday!!!! |
DV,
Any news on the roll bar? :CRY: |
Just that it is progressing.
No power washer necessary, most of the dust comes right off with a California Duster :) Got to get a cheaper camera! DV |
Quote:
|
Motor is now home permanently! Made the left moungt and everything ines up great. Haven heard about a "kick-down asembly hae you? Ready to go in!
DV |
Quote:
DV, Its out for delivery today. According to UPS LUDINGTON, MI, US 08/15/2008 5:47 A.M. OUT FOR DELIVERY |
Quote:
Take a look at this add in the CC for sale, http://www.clubcobra.com/classifieds...uct=1486&cat=4 Terry |
Terry,
Thanks for the heads up on the bars. I PMed to get some info, just in case Eric has problems getting one made for me. The ones for sale are more than likely 1.5" and I really want 2" I might buy them anyway, just so we have a set to use for a pattern for anyone else that might need one down the road. Thanks again Terry!!! |
cpteddie,
certainly take a look, you don't need the right besides I hate installing the right one :mad:,but I will if you insist. Dont know where wet dog is at with his at the moment. Now these will be the smaller roll bars,. 1 7/8 vs 2". Thanks for spotting them Terry! Cripe maybe I should get them for patterns?? DV |
Quote:
Beat you to it DV. If they are still for sale, I'll pick them up for just as you said...we have patterns **) |
cpteddie,
Anorther small part please, since the MSD coil has so much trouble retaining the coil wire which it does we need a part # PN 8217- like this is an accident! :rolleyes: DV |
Quote:
See you tomorrow around 11ish |
cpteddie,
Don't know if you saw this in the other post but here is your front bracket being used. You can't see the uprights for the fan or the final 120' on the fuel pump to the carb.The #10 lines were missing at the time of the picture for the oil adapter but are in place now. http://www.clubcobra.com/photopost/d...most_done1.JPG DV |
Looking good DV!!!
Got a late start this morning. Still heading over to your place. Should be there around 2pm or so. See you soon.... |
DV,
Is the petcock on the top of the tank for bleeding the air out of the system? Terry |
Terry,
May seem silly, but yes it is. Takes care of a multitude of problems! DV |
Ed,
The "you know what has been found""! I was so used to loooking for all your stuff you left behind in the boxes on the floor, I forgot to look in your dedicated boxing on the car shelves! Wiring is really hopping at this point- really hopping! DV |
| All times are GMT -7. The time now is 05:49 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: